COMPUTER NETWORKING

Previous
Next

NETWORK LAYER

INTRODUCTION

Question [CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
What are the required steps for configuring an interface on a router? (Choose two)
A
Provide Layer 3 addressing information
B
Add a description to the interface
C
Turn on routing on the interface
D
Activate the interface
Explanation: 

Detailed explanation-1: -Add a description. Although optional, it is a necessary component for documenting a network. Configure the IPv4 address. Configure a clock rate on Serial interfaces. Enable the interface. 20-Mar-2014

Detailed explanation-2: -Open any web browser and type in 192.168. 1.1 in the address bar. This should be the default Cisco router IP address and will take you to your Cisco router login page.

Detailed explanation-3: -In order to assign an IP address to an interface on the router, you must be at the interface prompt for the appropriate interface (using the global configuration interface command). Once at the interface prompt, you can use the IP address command and specify the IP address and subnet mask for the interface.

There is 1 question to complete.
Previous
Next