NETWORK LAYER
INTRODUCTION
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
IEGRP
|
|
RIP
|
|
ICMP
|
|
IP
|
Detailed explanation-1: -Explanation: RIP gives a full route table update every 30 seconds.
Detailed explanation-2: -Routing Information Protocol (RIP) is a distance-vector routing protocol. Routers running the distance-vector protocol send all or a portion of their routing tables in routing-update messages to their neighbors. You can use RIP to configure the hosts as part of a RIP network.
Detailed explanation-3: -RIP is a true distance-vector routing protocol. It sends the complete routing table out to all active interfaces every 30 seconds. RIP uses only one thing to determine the best way to a remote network-the hop count.
Detailed explanation-4: -The Routing Information Protocol, version 2 (RIPv2) is an enhanced version of RIP that includes support for important routing features such as class-less addressing and variable-length subnet masks [37]. RIPv2 is a distance-vector protocol that has been in use for many years.