NETWORK LAYER
UNICAST ROUTING
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
C 172.16.1.0 is directly connected, Serial0/0
|
|
|
S 172.16.1.0 is directly connected, Serial0/0
|
|
|
C 172.16.1.0 [1/0] via 172.16.2.2
|
|
|
S 172.16.1.0 [1/0] via 172.16.2.2
|
Detailed explanation-1: -255.0 172.16. 2.2 command. How will this route appear in the routing table? Explanation: The route will appear in the routing with a code of S (Static).
Detailed explanation-2: -What command, or set of commands, would be used to determine if the following configuration on router HQ works as designed? To test a floating static route, take down the main route/link in order to see whether the backup link appears in the routing table. The show ip route command simply shows the routing table.
Detailed explanation-3: -0.0/8 and 192.168. 0.0/24. The character C in the routing table indicates that a route is a directly connected route. You can see only connected routes in a router’s routing table by typing the show ip route connected command.