COMPUTER SCIENCE AND ENGINEERING
COMPUTER NETWORKING
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
IP address
|
|
|
Default gateway
|
|
|
DHCP server
|
|
|
DNS
|
Detailed explanation-1: -A, D. For network communications on a TCP/IP network, an IP address and a subnet mask are required. If you want to communicate outside your network, a default gateway is also required.
Detailed explanation-2: -Each device on an IP network requires 3 different pieces of information in order to correctly communicate with other devices on the network: an IP address, a subnet mask, and a broadcast address. You will usually see each of these numbers written as four “octets” (e.g. 198.41. 12.151, 255.255.
Detailed explanation-3: -The IP Configuration window configures the Internet Protocol parameters, allowing the device to receive and send IP packets. In its factory default configuration, the switch operates as a multiport learning bridge with network connectivity provided by the ports on the switch.
Detailed explanation-4: -When you configure the TCP/IP protocol on a Windows computer, the TCP/IP configuration settings require: An IP address. A subnet mask. A default gateway.
Detailed explanation-5: -Under IP assignment, select Edit. Under Edit IP settings, select Automatic (DHCP) or Manual. Under Edit IP settings, choose Manual, then turn on IPv4. To specify an IP address, in the IP address, Subnet prefix length, and Gateway boxes, type the IP address settings.