FORESTRY
FOREST MANAGEMENT
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
Thin sheet of wood used in paneling and furniture
|
|
|
Wood used for making fiber for paper and other products
|
|
|
Wood from Conifers
|
|
|
Wood from Deciduous trees
|
Detailed explanation-1: -Plywood is an engineered wood from the manufactured boards family which includes particle board and oriented strand board (OSB). It is made from thin sheets of veneer peeled from debarked wood. These thin layers, also called plies, are glued together in alternating right angles to create a cross-grain pattern.
Detailed explanation-2: -Veneer is technically a thin layer of hardwood, usually thinner than 1/8 of an inch. Typically, veneer is bonded, or glued with adhesive, to a cheaper surface that is hidden below. A less expensive wood or particle board can often be found underneath.
Detailed explanation-3: -In woodworking, veneer refers to thin slices of wood and sometimes bark, usually thinner than 3 mm (1⁄8 in), that typically are glued onto core panels (typically, wood, particle board or medium-density fiberboard) to produce flat panels such as doors, tops and panels for cabinets, parquet floors and parts of furniture.