GEOLOGY

Detailed explanation-1: -Groundwater occurs in the saturated soil and rock below the water table. If the aquifer is shallow enough and permeable enough to allow water to move through it at a rapid-enough rate, then people can drill wells into it and withdraw water.

Detailed explanation-2: -Most groundwater, including a significant amount of our drinking water, comes from aquifers. In order to access this water, a well must be created by drilling a hole that reaches the aquifer. While wells are manmade points of discharge for aquifers, they also discharge naturally at springs and in wetlands.

Detailed explanation-3: -Permeability is a measure of the interconnectedness of pores. The connection between pore spaces allows groundwater to flow through the sediment or rock. The combination of water storage (porosity) and flow (permeability) makes a good aquifer-a rock unit or sediment that contains usable groundwater.

Detailed explanation-4: -Groundwater can also be extracted through a well drilled into the aquifer. A well is a pipe in the ground that fills with groundwater. This water can be brought to the surface by a pump. Shallow wells may go dry if the water table falls below the bottom of the well.

Detailed explanation-5: -These are called confined aquifers, or sometimes artesian aquifers. A well in such an aquifer is called an artesian well. The water in these wells rises above the top of the aquifer because of confining pressure; the level to which it rises is called the static water level.