COMPUTER HARDWARE COMPONENTS FUNCTIONS
NETWORK INTERFACE CARD NIC
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
Point and click start button
|
|
|
Point and click control panel
|
|
|
Point and click change clicking adapter settings
|
|
|
Point and double clicking local area connection
|
Detailed explanation-1: -Click Network and Internet. Click Network and Sharing Center. On the left pane, click Change adapter settings. Right-click the local area network connection that is connected to the radio hardware and select Properties.
Detailed explanation-2: -The NIC settings page is used to set the speed, duplex, and MTU of the System NICs, to set the behavior of the bridges in the event of an appliance failure (for example, fail to wire), and to set the behavior of the second port in a bridge pair when the first port goes down (for example, link state mirroring).
Detailed explanation-3: -A NIC provides a computer with a dedicated, full-time connection to a network. It implements the physical layer circuitry necessary for communicating with a data link layer standard, such as Ethernet or Wi-Fi. Each card represents a device and can prepare, transmit and control the flow of data on the network.
Detailed explanation-4: -Select the Start button, then type settings. Select Settings > Network & internet. The status of your network connection will appear at the top. Windows 10 lets you quickly check your network connection status.