TELECOMMUNICATIONS SYSTEMS
COMMUNICATION WIRELESS COMPUTING DEVICES
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
ROM
|
|
|
RAM
|
|
|
SDRAM
|
|
|
CD-ROM
|
Detailed explanation-1: -The MAC address is often referred to as a burned-in address (BIA) because, historically, this address is burned into ROM (Read-Only Memory) on the NIC. This means that the address is encoded into the ROM chip permanently-it cannot be changed by software.
Detailed explanation-2: -MAC addresses are primarily assigned by device manufacturers, and are therefore often referred to as the burned-in address, or as an Ethernet hardware address, hardware address, or physical address. Each address can be stored in hardware, such as the card’s read-only memory, or by a firmware mechanism.
Detailed explanation-3: -Sometimes a MAC address is referred to as a burned-in address (BIA) because the address is hard coded into read-only memory (ROM) on the NIC. This means that the address is permanently encoded into the ROM chip. With modern PC operating systems and NICs, it is possible to change the MAC address in software.
Detailed explanation-4: -MAC addresses are most often assigned by the manufacturer of a network interface controller (NIC) and are stored in its hardware, such as the card’s read-only memory or some other firmware mechanism.