TELECOMMUNICATIONS SYSTEMS
HOW STAR BUS RING MESH TOPOLOGY CONNECT COMPUTER NETWORKS IN ORGANIZATIONS
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
ST
|
|
|
BNC
|
|
|
RJ-45
|
|
|
BNC
|
Detailed explanation-1: -1000BASE T applications use the RJ45 connector.
Detailed explanation-2: -The RJ-45 connector is used for 1000BASE-T. 1000BASE-T: The OSA–Express 1000BASE-T Ethernet ports must be connected to compatible link partners. The speed/duplex settings should be the same at both ends of a cable.
Detailed explanation-3: -An 8-pin/8-position plug or jack is commonly used to connect computers onto Ethernet-based local area networks (LAN). Two wiring schemes–T568A and T568B–are used to terminate the twisted-pair cable onto the connector interface.
Detailed explanation-4: -The eight-pin RJ45 connector is a standardised interface which often connects a computer to a Local Area Network (LAN). This type of connector was originally developed for telephone communications but is now used in a range of applications. The abbreviation, RJ45, stands for Registered Jack-45.
Detailed explanation-5: -UTP cable often is installed using a Registered Jack 45 (RJ-45) connector (see Figure 8-2). The RJ-45 is an eight-wire connector used commonly to connect computers onto a local-area network (LAN), especially Ethernets. When used as a networking medium, UTP cable has four pairs of either 22-or 24-gauge copper wire.