TELECOMMUNICATIONS SYSTEMS
HOW STAR BUS RING MESH TOPOLOGY CONNECT COMPUTER NETWORKS IN ORGANIZATIONS
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
Your company is moving into a new building. All 1OBaseT jacks for the workstations have been labeled and relevant patch panel to hub connections have been made too. You plug in a workstation to a jack and, you do not get a link light on the NIC or the hub. You have tried to replace both patch cables with known, good patch cables. It still does not work. What should you do next?
|
|
Hook a protocol analyzer to the hub
|
|
|
Reinstall the network interface card driver
|
|
|
Test the cable from wall jack to patch panel
|
|
|
Replace the workstation patch cable with a crossover cable.
|
Explanation:
Detailed explanation-1: -10Base-T works for 10 Mbps networks only and uses unshielded twisted pair cable with RJ-45 connectors at each end and maximum length of 100 meters. They also only use two pairs of cables.
Detailed explanation-2: -RJ45 connector is an 8-position, 8-contact (8P8C) modular plug, and jack, applied for Ethernet-based local area networks (LAN).
There is 1 question to complete.