TELECOMMUNICATIONS SYSTEMS
NETWORK ARCHITECTURE
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
Crimp-on connectors
|
|
|
Soldered connectors
|
|
|
RJ45
|
|
|
Blade Connectors
|
Detailed explanation-1: -RJ45 interface is considered the most common twisted-pair connector for Ethernet cables and networks. “RJ” means “registered jack”-a standardized telecommunication network interface for connecting voice and data equipment to a service provided by a local exchange carrier or long-distance carrier.
Detailed explanation-2: -The standard connector for unshielded twisted pair cabling is an RJ-45 connector. This is a plastic connector that looks like a large telephone-style connector (See fig. 2). A slot allows the RJ-45 to be inserted only one way.
Detailed explanation-3: -Ethernet cables come with RJ45 connectors on both ends. Because of this, an Ethernet cable is sometimes designated as an RJ45 cable. These cables are often used to connect computers onto Ethernet networks.
Detailed explanation-4: -The cables terminate with an RJ45, or registered jack 45, connector. The RJ45 connector is just the piece at the end of the Ethernet cable that’s inserted into the LAN port.
Detailed explanation-5: -(Registered Jack-45) A common data networking interface that employs a cable of twisted wire pairs and an 8-pin modular jack. RJ-45 is used for Ethernet and Type 3 Token Ring networks. See cable categories and RJ-48. RJ-45 Connectors Eight-wire RJ-45 connectors are used with Ethernet and Type 3 Token Ring networks.