TELECOMMUNICATIONS SYSTEMS
NETWORK ARCHITECTURE
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
Ipconfig
|
|
Ipconfig /all
|
|
Ipv6config
|
|
Ipv6config /all
|
Detailed explanation-1: -First, click on your Start Menu and type cmd in the search box and press enter. A black and white window will open where you will type ipconfig /all and press enter. There is a space between the command ipconfig and the switch of /all. Your ip address will be the IPv4 address.
Detailed explanation-2: -Ipconfig /all command To show all the information about your network adapter, you will need to use the /all parameter. ipconfig /all. This will return the following information for each network adapter in your device: Physical Address. This is the MAC address of your network adapter.
Detailed explanation-3: -ipconfig /all displays all configuration information for each adapter bound to TCP/IP.
Detailed explanation-4: -ipconfig/all: It gives the full configuration of the system. ipconfig/registerdns: This command refreshes all DHCP leases and reregisters the DNS names. ipconfig/displaydns: It displays the information that is stored in the DNS Resolver cache. It has all the DNS information that has been used earlier.