MICROPROCESSOR AND MICROCONTROLLER

Detailed explanation-1: -Read Interrupt Mask (RIM) – This instruction is used to read the status of the hardware interrupts (RST 7.5, RST 6.5, RST 5.5) by loading into the A register a byte which defines the condition of the mask bits for the interrupts. It also reads the condition of SID (Serial Input Data) bit on the microprocessor.

Detailed explanation-2: -To get the status information about the interrupt system, RIM instruction provides status information about interrupt system and this instruction can be used for serial input of data. Through this RIM instruction, 8085 can know which interrupt is masked or unmasked, etc.

Detailed explanation-3: -The RIM (Read Interrupt Mask) instruction is a single-byte instruction in the 8085 microprocessor that is used to read the contents of the interrupt mask register (IMR). The IMR is an 8-bit register that is used to enable or disable interrupts in the 8085 microprocessor.

Detailed explanation-4: -Remote infrastructure management (RIM) is the remote management of information technology (IT) infrastructure. This can include the management of computer hardware and software, such as workstations (desktops, laptops, notebooks, etc.), servers, network devices, storage devices, IT security devices, etc. of a company.

Detailed explanation-5: -Records information management is also known as records management (RM) and records and information management (RIM).