INTRODUCTION TO MICROPEOCESSOR
MODEL OF MICROPROCESSOR
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
load data to accumulator.
|
|
|
end of program.
|
|
|
load accumulator with contents of register.
|
|
|
store result in memory.
|
Detailed explanation-1: -In the x86 computer architecture, HLT (halt) is an assembly language instruction which halts the central processing unit (CPU) until the next external interrupt is fired.
Detailed explanation-2: -In 8085 Instruction set, HLT is the mnemonic which stands for ‘Halt the microprocessor’ instruction. It is having a size of 1-Byte instruction.
Detailed explanation-3: -HLT opcode in 8085 microprocessor means end of program.
Detailed explanation-4: -47. Which of the following is not correct about HLT instruction? Explanation: HLT is a machine control statement. Internally, the PC is disconnected from the address bus so, the next fetch is not possible.
Detailed explanation-5: –The Hold is a hardware input whereas HLT is a software instruction.-When the HLT state is executed the processor simply stops and the buses are driven to tri state. No form of acknowledgement signal is given out by the processor.