TROUBLESHOOTING COMPUTER ISSUES
IDENTIFYING HARDWARE SOFTWARE NETWORK PROBLEMS
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
-n
|
|
|
-t
|
|
|
-i
|
|
|
-a
|
Detailed explanation-1: -The-t parameter causes the ping tool to send messages to the target continuously until you manually stop it.
Detailed explanation-2: -The Host parameter is either a valid host name or Internet address. By default, the ping command will continue to send echo requests to the display until an Interrupt is received (Ctrl-C).
Detailed explanation-3: -Use the command “ping 192.168. 1.101-t” to initiate a continuous ping. Again, replace the IP address with one specific to your device as needed. The-t can be placed before or after the IP address.
Detailed explanation-4: -/t-ping continues sending Echo request messages to the destination until interrupted manually. To interrupt and display statistics, press CTRL + Break. To interrupt and quit the ping, press CTRL + C.
Detailed explanation-5: -Time to live (TTL) refers to the amount of time or “hops” that a packet is set to exist inside a network before being discarded by a router. TTL is also used in other contexts including CDN caching and DNS caching.