INTRODUCTION
MICROSCOPE PARTS MAGNIFICATION RESOLUTION
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
Stage
|
|
Stage clips
|
|
Light source
|
|
Eyepiece
|
Detailed explanation-1: -Stage: The flat platform where you place your slides. Stage clips hold the slides in place. Revolving Nosepiece or Turret: This is the part that holds two or more objective lenses and can be rotated to easily change power. Objective Lenses: Usually you will find 3 or 4 objective lenses on a microscope.
Detailed explanation-2: -Spring loaded metal clips on the microscope stage are used to hold the slide in place.
Detailed explanation-3: -Stage clip is a spring piece mounted on the microscope stage for fixing the slide or the object to be observed. After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions.
Detailed explanation-4: -Arm-The arm of the microscope supports the body tube.
Detailed explanation-5: -Place the slide on the Mechanical stage and fasten it with the stage clips. Look at the side of the microscope and turn the Adjustment knob until the lens is very close to, but not touching, the slide. Look through the eyepiece and move the Adjustment knob so that the lens lifts away from the slide.