INTRODUCTION
MICROSCOPE PARTS MAGNIFICATION RESOLUTION
|
Question
[CLICK ON ANY CHOICE TO KNOW THE RIGHT ANSWER]
|
|
|
Always turn the light source off after you are done
|
|
|
Carry the microscope with the arm on on hand
|
|
|
Carry it from the eyepiece lens
|
|
|
Carry the microscope with the base on the other hand
|
Detailed explanation-1: -Never touch the lenses with your fingers. Your body produces an oil that smudges the glass. This oil can even etch the glass if left on too long.
Detailed explanation-2: -NOTE: NEVER USE DRY LENS TISSUE OR DRY SWABS ON A DRY OCULAR OR OBJECTIVE: IT WILL SCRATCH THE LENS. NEVER USE BIBULOUS PAPER, KIMWIPES, PAPER TOWELS, OR FACIAL TISSUE ON AN OCULAR OR OBJECTIVE: THEY WILL SCRATCH THE LENS.
Detailed explanation-3: -Always carry a microscope with both hands. Grasp the arm with one hand and place the other hand under the base for support.
Detailed explanation-4: -Look through the eyepiece and move the Adjustment knob so that the lens lifts away from the slide. The image should come into focus. Be careful not to drop the lens into the face of the slide, as this may cause damage to the lens. The condenser can be adjusted to increase or decrease light intensity.